Alessandro Striplac Peel Or Soak is UV nail polish that lasts for up to three weeks. The new Striplac has a quick peel-off or soak-off replacement. The varnish is easy to apply and covers with the first layer. In addition, the UV varnish protects and consolidates the natural nail without splintering. Cure the paint for 60 to 90 seconds under an LED lamp without additional drying time.
Applying STRIPLAC PEEL OR SOAK 1. Degrease the nail with a cleansing pad. 2. Buff the nail thoroughly with the 2-step polishing file. 3. Choose a colour and paint the nail over the entire surface with a thin coat of polish. 4. Cure the polish for 60 seconds under the Strong Pearl LED lamp. 5. Coat the entire nail surface with the Top Coat. 6. Cure the Top Coat for 90 seconds under the Strong Pearl LED Lamp. 7. Degrease the nail with the cleaning pads to remove any sticky residue. DONE!
Peel-Off Step-by-Step 1. Apply the Peel-Off Activator to the nail plate and allow it to work for a few minutes. 2. Press the polish sideways from the nail edge using the hoof stick. Then peel the polish off the nail in one layer. 3. Then don’t forget to care for the nails. Apply the Care & Gloss Care Stick and you’re DONE!
Soak-Off Step-by-Step 1. Apply a small amount of Soak-Off Liquid to the foil pads. Then place the soaked pad side on the nail plate and press the foil tightly around the finger so that the pads moisten the nail plate with acetone. 2. Let the Soak-Off Pads work for 5-10 minutes and then the polish will come off! 3. Then don’t forget to care for the nails. Apply the Care & Gloss Care Stick and you’re DONE!