Adults
Gift sets
Clearance
A self-test for home use designed to detect Influenza A, Influenza B, and SARS-CoV-2 (COVID-19) antigens from a single nasal swab. One swab delivers three clear results within 10 minutes.
Why test?
Influenza and COVID-19 are caused by different viruses, yet they share very similar symptoms: fever, cough, sore throat, headache, muscle aches, fatigue, and a runny nose. The risk of severe illness is higher in individuals over 65 years of age, pregnant women, young children, and those with chronic medical conditions. Perform the test during the first days of illness when viral load is highest. A negative result does not rule out infection; consult a doctor if symptoms worsen.
Specifications:
Accuracy: >98 %
Kit contents:
- 1 × Test cassette
- 1 × Sterile nasal swab
- 1 × Tube with extraction buffer
- 1 × Tube stand
- 1 × Waste bag
- 1 × Instructions for use
Frequently asked questions:
When should I perform the test? Within the first 1–5 days of symptoms when viral load is at its peak. Testing too early may yield a negative result.
Why use a combo test? Flu and COVID-19 share nearly identical symptoms. A single swab identifies the specific virus, helping you decide on isolation and medical consultation.
What to do if the result is positive? Stay at home, limit contact with others, and follow local public health guidelines. Seek medical advice if you belong to a high-risk group or if your condition worsens.
Rapid tests are intended for preliminary screening and do not replace professional medical advice.
1. Wash your hands with soap and water for at least 20 seconds before and after the test. Remove the cap from the extraction buffer tube and place the tube into the tube holder on the box.
2. Nasal swab collection: Remove the sterile swab from its packaging without touching the soft tip. Insert the swab approximately 2 cm into the nostril until slight resistance is felt, then slowly rotate it 5 to 10 times against the inner nasal wall. Do not insert further if strong resistance or pain occurs. Gently withdraw the swab and repeat the process in the other nostril using the same swab.
3. Sample preparation: Place the swab into the extraction tube so it touches the bottom, then rotate it for 10 to 15 seconds while squeezing the swab head against the inside of the tube. Remove the swab while squeezing the tip against the inner wall of the tube, then place the used swab into a plastic bag. Close the tube cap or attach the dropper tip.
4. Testing procedure: Remove the test cassette from its sealed foil pouch and use it within one hour. Place the cassette on a flat, horizontal surface. Invert the extraction tube, add 3 drops of the prepared sample into each sample well (S) of the cassette, and start a timer. Do not move the cassette while the result is developing. Read the results at 10 minutes. Do not interpret results after 20 minutes.
5. Interpretation of results: POSITIVE SARS-CoV-2: Two colored lines appear in the COVID-19 window (C and T). POSITIVE Influenza A: Two lines appear in the FLU A+B window (C and A). POSITIVE Influenza B: Two lines appear in the FLU A+B window (C and B). POSITIVE Influenza A and B: Three lines appear (C, A, and B). Any shade of color in the test region should be considered a positive result; consult a healthcare professional and follow local guidelines. NEGATIVE: One colored line appears in the control region (C) and no lines appear in the test regions; a false negative result is possible, so repeat the test after 1 to 2 days if in doubt. INVALID: No control line appears; repeat the procedure using a new test kit.
The ingredients are constantly updated. Before using a product, please read the list of ingredients on its packaging to ensure they are suitable for your personal use.
SARS-CoV-2 and Influenza A+B Antigen Comb Rapid Antigen Test 1 pc.
A self-test for home use designed to detect Influenza A, Influenza B, and SARS-CoV-2 (COVID-19) antigens from a single nasal swab. One swab delivers three clear results within 10 minutes.
Why test?
Influenza and COVID-19 are caused by different viruses, yet they share very similar symptoms: fever, cough, sore throat, headache, muscle aches, fatigue, and a runny nose. The risk of severe illness is higher in individuals over 65 years of age, pregnant women, young children, and those with chronic medical conditions. Perform the test during the first days of illness when viral load is highest. A negative result does not rule out infection; consult a doctor if symptoms worsen.
Specifications:
Accuracy: >98 %
Kit contents:
- 1 × Test cassette
- 1 × Sterile nasal swab
- 1 × Tube with extraction buffer
- 1 × Tube stand
- 1 × Waste bag
- 1 × Instructions for use
Frequently asked questions:
When should I perform the test? Within the first 1–5 days of symptoms when viral load is at its peak. Testing too early may yield a negative result.
Why use a combo test? Flu and COVID-19 share nearly identical symptoms. A single swab identifies the specific virus, helping you decide on isolation and medical consultation.
What to do if the result is positive? Stay at home, limit contact with others, and follow local public health guidelines. Seek medical advice if you belong to a high-risk group or if your condition worsens.
Rapid tests are intended for preliminary screening and do not replace professional medical advice.
1. Wash your hands with soap and water for at least 20 seconds before and after the test. Remove the cap from the extraction buffer tube and place the tube into the tube holder on the box.
2. Nasal swab collection: Remove the sterile swab from its packaging without touching the soft tip. Insert the swab approximately 2 cm into the nostril until slight resistance is felt, then slowly rotate it 5 to 10 times against the inner nasal wall. Do not insert further if strong resistance or pain occurs. Gently withdraw the swab and repeat the process in the other nostril using the same swab.
3. Sample preparation: Place the swab into the extraction tube so it touches the bottom, then rotate it for 10 to 15 seconds while squeezing the swab head against the inside of the tube. Remove the swab while squeezing the tip against the inner wall of the tube, then place the used swab into a plastic bag. Close the tube cap or attach the dropper tip.
4. Testing procedure: Remove the test cassette from its sealed foil pouch and use it within one hour. Place the cassette on a flat, horizontal surface. Invert the extraction tube, add 3 drops of the prepared sample into each sample well (S) of the cassette, and start a timer. Do not move the cassette while the result is developing. Read the results at 10 minutes. Do not interpret results after 20 minutes.
5. Interpretation of results: POSITIVE SARS-CoV-2: Two colored lines appear in the COVID-19 window (C and T). POSITIVE Influenza A: Two lines appear in the FLU A+B window (C and A). POSITIVE Influenza B: Two lines appear in the FLU A+B window (C and B). POSITIVE Influenza A and B: Three lines appear (C, A, and B). Any shade of color in the test region should be considered a positive result; consult a healthcare professional and follow local guidelines. NEGATIVE: One colored line appears in the control region (C) and no lines appear in the test regions; a false negative result is possible, so repeat the test after 1 to 2 days if in doubt. INVALID: No control line appears; repeat the procedure using a new test kit.
The ingredients are constantly updated. Before using a product, please read the list of ingredients on its packaging to ensure they are suitable for your personal use.
